How to Create A Rodent-Free Planting Bed

plantbed_canva

Are rodents like mice and squirrels ruining the vegetables and crops you’ve worked hard to cultivate? Fear not!

Expert gardener Dani Baker has offered a few tips to help you keep a rodent-free planting bed this growing season.

The following is an excerpt from The Home-Scale Forest Garden by Dani Baker. It has been adapted for the web.


Creating A Rodent-Proof Planting Bed

Figure 11.16. Saffron corms planted in a reinforced cage.

Here are instructions for making a rodent-proof planting bed like the one I made for my saffron crocus crop. This size bed will accommodate 300 corms. You can adjust the length and width of the bed to accommodate the number and spacing of the bulbs you intend to plant, as well as the space you have available. I constructed mine on the soil surface because of drainage issues at the site I chose. An alternative, as long as your soil is well drained and does not have a high water table, would be to dig out an area equal in dimensions to the hardware cloth “cage” and set the cage into the excavated area. In that case, the cage does not need to be reinforced with an outer wood frame.

Materials

  • Two 14-foot (4.25 m) lengths of 5-foot-wide (1.5 m) hardware cloth (1⁄2-inch [13 mm] mesh)
  • Two 13-foot (4 m) 2 × 6 wooden planks, or one for no wood frame
  • Two 2 × 6 wooden planks, each 4 feet, 4 inches (132 cm) long, or one for no wood frame
  • Stapling gun and staples
  • Two 13-foot 1 × 3 wooden furring strips Two wooden furring strips, each 4 feet, 4 inches long
  • 3-inch (8 mm) and 11⁄2-inch (4 mm) galvanized deck screws
  • Wire-cutting tool

Process

Step 1. Cut the corners. Using a wire-cutting tool, make a 6-inch (15 cm) cut at each of the four corners of one of the lengths of hardware cloth. To the extent possible, cut through the tines as close as possible to a crossing wire, which leaves flexible ends that can later be folded over to secure the corners of the cage.

Step 2. Fold the mesh along one long edge. Place a 13-foot-long plank on edge on top of the hardware cloth, parallel to one of the long sides and 6 inches from the edge. Use a hammer to bend that side of the hardware cloth around the plank so that a 6-inch portion of the hardware cloth juts straight up.

Step 3. Fold along the other edges. Repeat this for the other three sides of the hardware cloth. This creates a “bed” of hardware cloth that is 4 feet (1.25 m) wide and 13 feet (4 m) long with 6-inch-tall sides.

Step 4. Wrap the “flaps” of hardware cloth at each of the four corners around the adjacent upright edge. Secure them in place by folding the tines at the end of each flap through and around the adjacent upright edge of hardware cloth.

Figure 11.15. Constructing a hardware cloth cage, steps 1 through 4. Illustration courtesy of Turner Andrasz.

Step 5. To install the cage, clear and level a site of the proper dimensions. Place the cage on (or in) the ground.

Step 6. To reinforce the cage if above ground, construct a wood frame around it by lining up the 13-foot planks and 4-foot 4-inch planks. Using the 3-inch screws, screw the planks together to secure them in place.

Step 7. Staple the wire cage to the inside of the wood frame.

Step 8. Sprinkle a thin layer of compost over the bottom of the wire cage and nestle crocus corms (or whatever you are plant- ing) into it at the proper spacing.

Step 9. Cover the corms, bulbs, or crowns with more compost and top that with soil, from excavating the site if available.

Step 10. Top off the bed with a layer of semi-composted wood chips.

Step 11. Lay the second piece of hardware cloth over the bed. To secure it in place and thus rodent-proof the bed, use the 11⁄2-inch screws to attach the 1 × 3 furring strips (placed over the hardware cloth) to the tops of the border planks on all four sides. If your cage is embedded in the ground, you can use heavy rocks to weigh down the hardware cloth cover so that rodents can’t slip underneath it.


Recommended Reads

10 Easy-to-Grow Flowers for Pest Control

Plants & Pests: Will Bonsall’s Advice on “Wee Beasties”

Read The Book

The Home-Scale Forest Garden

How to Plan, Plant, and Tend a Resilient Edible Landscape

$22.72

Enter your email to sign up for our newsletter and save 25% on your next order

Recent Articles

pruning

A Guide to Pruning Protected Crops

Pruning is essential for keeping protected crops healthy & balanced through the winter months. Keep reading for some helpful tips on pruning greenhouse and hoophouse plants! The following is an excerpt from The Greenhouse and Hoophouse Grower’s Handbook by Andrew Mefferd. It has been adapted for the web. Unless otherwise noted, all photographs copyright © 2017…

Read More
keeping seeds organized

Keeping Seeds Organized: Saving & Storing

Storing seeds is the key to having a successful growing season. Follow these tips for keeping seeds organized so you’re ready to plant as soon as the time is right!

Read More
worms in soil

Soil Is Alive: What Lives In Our Soil?

Ever wonder what worms and centipedes are doing as they crawl through your soil? They’re actually working to improve the soil’s health, which benefits the environment and all living things in the long run. The following is an excerpt from Farming on the Wild Side by Nancy J. Hayden and John P. Hayden. It has been adapted…

Read More
mushrooms

Growing Shiitake Mushrooms in a Garage or Yard

Learn how to grow shiitake mushrooms in almost any environment, including your yard and even your garage!

Read More
extend the growing season

How to Extend the Growing Season

Winter may be coming, but that doesn’t mean you should put away those tools just yet! Extend the growing season past the first frost with a few modifications.

Read More