Two-Step Bed Flipping: Increasing Your Production on a Small Footprint

bed flipping

Flipping your plant beds is as simple as 1, 2! Follow these tips for two-step bed flipping to successfully increase your crop production no matter the season.

The following is an excerpt from The Lean Micro Farm by Ben Hartman. It has been adapted for the web.

Unless otherwise noted, all photographs and illustrations copyright © 2023 by Clay Bottom Farm.


A Guide to Two-Step Bed Flipping

When preparing garden beds, there are only two things you really need to do—clear away old crops (or weeds) and smooth the ground. Everything else is probably superfluous, or trivial, to use Pareto’s term. In this chapter, I explain a simple way to essentialize bed preparation.

On tiny farms, market gardeners might flip—or transition—beds from one crop to another several times per season to make the most of every square foot. With these rotations, you effectively double or triple your production area by planting the same beds two or three times each year.

That is, a 1⁄3-acre plot literally becomes equal to a 2⁄3- or 1-acre farm growing one crop per year. This justifies applying a large amount of compost to keep fertility levels high for multicropped beds.

The Key to Successful Bed Flipping

The key is to flip the beds quickly and efficiently. At Clay Bottom Farm, we flip more than 100 beds each season—easily our most burdensome task, an opportune place to lean up.

Here is the bed-flipping process we devised when we moved to our new farm. First, we cover old crops (usually without cutting) with a silage tarp and let the greens decay in the sun (step 1); within a few weeks, the crops will turn to mush.

Next, we remove the tarp and rake any debris into the path, if needed (step 2). The bed is then ready to replant—no broadforking, chisel plowing, rotovating, hoeing, undercutting, or fertilizing required. The method is as uncomplicated as it gets.

Two-Step Bed Flipping: Perfecting the Method

bed flippingThe rule guiding the process is to leave roots in the ground. Roots left in place provide carbonaceous material for soil microbes to eat. Also, as they decay, roots leave air pockets behind, loosening the soil structure. The decayed plant matter also feeds the soil.

This method extracts the farmer from the growing process—you do just enough, as it were, and then walk away while nature does the rest. We save hours every season with this approach compared to conventional methods like tilling, chisel plowing, broadforking, ripping, or pulling out old crops by hand, while sparing our bodies unnecessary hard work.

After sixteen years of growing, I’ve concluded that most methods promoted for bed preparation, like those just mentioned, can be skipped, especially if you are deep mulching. They don’t pass the Pareto test.

As with deep mulching, this method would be impractical in a large operation with acres in production—it would be too cumbersome to manage the tarps. Below I describe two-step bed flipping in detail.

Just Smother It: A Better Way to Flip Short Crops

For spinach, baby greens, head lettuce, and other “short” crops, we pull a 14′ × 75′ silage tarp over top of the beds when we are done harvesting them. This size of tarp covers two beds at a time plus the paths on either side. If we need to cover just one bed, we’ll fold the tarp in half.

I recommend cutting tarps to narrow widths like this to make it easier for one person to handle them. Remember Schumacher’s advice: Design with humans in mind. Make your farming comfortable to do.

Cutting and Pinning Tarps

Cut tarps about 18″ wider than the bed/path width you plan to cover, as the crops underneath will push the tarp up slightly. Silage tarps for market gardening are available many places online. We buy ours at a local farm supply in order to save shipping costs, which can be substantial due to the weight of the tarps.

Next, we pin down the tarps with sandbags, which we fill with driveway gravel for optimum drainage. One sandbag spaced every two paces—about 6’—keeps the tarps pinned down in the wind. If you are in an extra-windy area, choose a closer spacing. If we are using more than one tarp side by side, we make sure to overlap the edges by at least 12″.

Laying the Tarp & Covering Crops

bed flippingTip #1: Align the edge of your tarp precisely with the edge of the plot. If the tarp is misplaced even by a few inches, you’ve given weeds room to grow. They will take full advantage of the opportunity.

Tip #2: Stretch the tarps a bit as you lay them so that they are as tight to the ground as possible. The tarps kill the crops through light deprivation— occultation—and by trapping heat. The tighter your tarps, the darker and hotter it is underneath them.

Tip #3: If you’ve laid down drip tapes to irrigate, leave them in place under the tarps. They are easy to remove, if needed, after the crop has died.

Tip #4: Farm like a tree and work ahead. Tarp beds at least two weeks ahead of when you need to plant. Don’t wait until the last minute. On our farm, at least two beds are usually covered by tarps at all times in preparation for planting.

Covering Preparation

There’s no reason to mow, cut, or shred crops before covering them, unless you want to trim them down so that the tarp lays flatter. For example, we will sometimes trim cilantro and basil plants if they are knee-high or taller. We leave these trimmings on the bed surface, under the tarp, to decompose in place.

In most cases, however, it’s better to save your time. Worms and microbes will sufficiently shred and chew up uncut greens.

Two-Step Bed Flipping: Finishing the Process

bed flippingAfter the greens have “melted” (died) under a tarp, we pull it off and rake the decomposed matter into a path, clearing the bed just enough to plant or transplant into it. If transplanting by hand, we will sometimes leave the residues on the surface as a kind of mulch instead of raking them off. However, raking is usually preferred.

Composting Decomposed Matter

Occasionally, this mess of decomposed matter is too bulky to fit neatly in a path. In this case, we rake it into a pile at the end of a bed, creating a small compost heap that we will spread across the bed in a month or two, once the greens have more fully broken down.

Alternatively, we might rake these spent greens underneath another nearby tarp—out of sight, out of mind—or add them to a compost pile near the plot. The point is to keep old plants as close to where they grew as possible, to let them enrich the soil and save yourself a backache.

The Takeaway: Let the Crops Lead the Way

There are rare occasions when we tarp a crop even before it has finished maturing. For example, in 2021, a bed of lettuce was overtaken by fast-growing Peruvian daisies that we had mistakenly let go to seed in 2020. We decided that instead of fighting the weeds, we would cover the bed with a tarp, let the daisies and lettuce melt, and start over in a few weeks with another crop.


Recommended Reads

Designing An Efficient Garden: Permanent Beds

Winter Growing DIY: Low Tunnel Tutorial

Read The Book

The Lean Micro Farm

How to Get Small, Embrace Local, Live Better, and Work Less

$22.72

Recent Articles

soil health

5 Principles of Soil Health

Wondering how to make your soil (and plants) thrive? Use these principles of soil health to properly prepare your farm or garden to grow. The following excerpt is from Dirt to Soil by Gabe Brown. It has been adapted for the web. (Photography curtesy of Gabe Brown.) Prefer audio? Listen to the excerpt below from the…

Read More
permanent beds

Permanent Beds: Designing An Efficient Garden

Permanent beds are going to change your gardening game. This type of garden bed helps improve soil health, ensures crop growth, and is extremely easy to design! The following is an excerpt from The Living Soil Handbook by Jesse Frost. It has been adapted for the web. Designing Permanent Beds The term permanent beds is…

Read More
fieldwork

Simplify Farm Fieldwork: Stop Working So Hard

Looking to simplify fieldwork on your farm? The key is to act like a tree: stop working so hard and let nature do some of the work for you.  The following is an excerpt from The Lean Micro Farm by Ben Hartman. It has been adapted for the web. Unless otherwise noted, all photographs and…

Read More
seed integrity

Preserving Seed Integrity: How Far is Far Enough?

While there is a lot of information out there about keeping the “purity” of seeds, the true “pure” seed is a myth. There are still best practices that any seed grower should keep in mind; but once they understand seed integrity and let cross-pollination happen, the real fun begins. The following is an excerpt from…

Read More

Birch & Walnut Syrups: Beyond the Maple

Move aside, maple! We have two new syrups to add to the table. Check out this insight on tapping, selling, and eating syrup from walnut & birch trees. The following is an excerpt from Farming the Woods by Steve Gabriel and Ken Mudge. It has been adapted for the web. Walnut Syrup Walnut (Juglans spp.)…

Read More